Production BOP Rams
Nothing shuts down a well as dependably as Double E equipment does, and a big reason is the quality and efficiency of Double E rams for production BOPs. We offer multiple variations of the following standard styles, including models ideal for temperature extremes, H2S service, and keyed and pressure-balanced BOPs. NACE certification is available. Special orders are invited. |
TYPE LP-DF
This all-rubber, steel-reinforced "dome face" ram will close on rods up to 1-1/2 inches in diameter and will also seal completely with no rod or wire in the hole; designed for a maximum working pressure of 1,500 psi. |
|
 |
TYPE LP
Tell us your rod size. The Type LP is molded to seal on the exact rod or pipe specified. Rated for a maximum working pressure of 1,500 psi. |
|
 |
TYPE HP6-FF
Holds securely at working pressures as high as 3,000 psi. All steel, with a molded rubber seal across the flat surface for "zero" shut-off operation (no rod in the hole). |
|
 |
TYPE HP6
As with the LP ram, the HP6 is manufactured to seal on the exact outside diameter of the rod or pipe you're using. We machine the steel face and mold the rubber seal to the size you specify, for secure sealing at working pressures of 3,000 psi or less. |
|
 |
|
